Tips
First Method:
Most carpet manufacturers cleaning recommendations state that the carpet should be sprayed using a Pre-Spray & Traffic Lane Cleaner, or an extraction product on the carpet, allowing the chemical to dwell for 3-5 minutes to emulsify the greasy soil and dirt. Then follow up by diluting Rinse & Neutralizer in the water tank of your carpet extractor at 2-3 oz. per gallon of water. Extract carpets as you would normally clean.
Second Method:
Dilute Rinse & Neutralizer in a sprayer at a 2-3 oz. per gallon ratio and lightly mist over the previously cleaned carpet, allowing to dry simultaneously.
Third Method:
To remove chemical build-up on extremely soiled carpets, dilute Rinse & Neutralizer in a carpet extractor at 2-3 oz. per gallon of water, and rinse the carpet before extraction, shampooing or bonnet buffing. Always test an inconspicuous area to determine colorfastness.
Benefit:
By using the Carpet Rinse Neutralizer through the extraction machine, it prevents the jets from clogging which could cause streaking during extraction.
-
Rinses away every trace of dirt an cleaning solution residue
Leaves carpets bright and soft
pH: 2.0
Excellent results, every time
Prevents browning and/or yellowing
Use as an after-spray or rinse agent
Works great on commercial and residential carpets